sane-ibm.5

sane-ibm(5)              SANE Scanner Access Now Easy              sane-ibm(5)

NAME

       sane-ibm - SANE backend for IBM and Ricoh SCSI flatbed scanners

DESCRIPTION

       The  sane-ibm library implements a SANE (Scanner Access Now Easy) back-
       end that provides access to the IBM 2456 and the Ricoh IS-410,  IS-420,
       and  IS-430  flatbed  scanners.  Support  for  the IS-410 and IS-430 is
       untested. Please contact the maintainer or the sane-devel mailing  list
       if you own such a scanner.

       This  backend  is  alpha-quality.  It  may  have bugs and some scanners
       haven't been tested at all. Be careful and pull the plug if the scanner
       causes unusual noise.

DEVICE NAMES

       This backend expects device names of the form:

              special

       Where  special is either the path-name for the special device that cor-
       responds to a SCSI scanner. The program sane-find-scanner helps to find
       out  the  correct  device.  Under  Linux,  such  a device name could be
       /dev/sg0 or /dev/sga, for example.  See sane-scsi(5) for details.

CONFIGURATION

       The contents of the ibm.conf file is a list of device names that corre-
       spond  to  SCSI  scanners.   Empty lines and lines starting with a hash
       mark (#) are ignored.  See sane-scsi(5) on details of what  constitutes
       a valid device name.

FILES

       /usr/local/etc/sane.d/ibm.conf
              The   backend   configuration  file  (see  also  description  of
              SANE_CONFIG_DIR below).

       /usr/local/lib/sane/libsane-ibm.a
              The static library implementing this backend.

       /usr/local/lib/sane/libsane-ibm.so
              The shared library implementing this backend (present on systems
              that support dynamic loading).

ENVIRONMENT

       SANE_CONFIG_DIR
              This environment variable specifies the list of directories that
              may contain the configuration file.  Under UNIX, the directories
              are  separated  by a colon (`:'), under OS/2, they are separated
              by a semi-colon (`;').  If this variable is not set, the config-
              uration  file is searched in two default directories: first, the
              current    working    directory    (".")     and     then     in
              /usr/local/etc/sane.d.  If the value of the environment variable
              ends with the directory separator character,  then  the  default
              directories are searched after the explicitly specified directo-
              ries.  For example, setting  SANE_CONFIG_DIR  to  "/tmp/config:"
              would    result    in   directories   "tmp/config",   ".",   and
              "/usr/local/etc/sane.d" being searched (in this order).

       SANE_DEBUG_IBM
              If the library was compiled with  debug  support  enabled,  this
              environment  variable controls the debug level for this backend.
              Higher debug levels increase the verbosity of the output.

SEE ALSO

       sane(7), sane-find-scanner(1), sane-scsi(5),

AUTHOR

       mf <massifr@tiscalinet.it>
       Maintained by Henning Meier-Geinitz <henning@meier-geinitz.de>

sane-backends 1.0.16              15 Apr 2003                      sane-ibm(5)